Mtd 249-645A Manual do Utilizador descarregar pdf (Página 7)

9. Secure the other end of high pressure hose to

valve. A 3/4" wrench is required. See figure 9.

11. Place end of engagement rod on valve spool and

secure with hex screw (M) and hex nut (N).

See figure 11.

NOTE

Use hydraulic sealant tape on threads.

HIGH PRESSURE

HOSE

FIGURE 9

10. Assemble the engagement handle to the beam

assembly using shoulder bolt (K) and flat washer

(L). A 3/4" wrench is required. See figure 10.

FIGURE 11

12. Thread ferrule (O) on engagement rod so there is

approximately 1/2" of thread showing.

Engagement handle must be at 90° to beam. Insert

ferrule into engagement handle. See figure 12.

NOTE

Engagement handle locked in reverse

position must depress valve spool to

limit.

FIGURE 10

FIGURE 12

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Sem comentários

Mtd 249-645A Manual do Utilizador Página 7