Mtd 249-645A Manual do Utilizador

FIFTY CENTSOWNIR’S MANUALASSEMBLY OPERATION MAINTENANCE PARTS LISTImportant:Read Safety Rules and Instructions CarefullyModel No. 249-645A8 H.P. DEL

3. Open the breather valve. Valve must be open when running log splitter. Valve must be closed when transporting lor splitter. See figure 19.V

NOTEIf you lock the engagement handle in the reverse slot, the ram will return until it hits the return stroke stop plunger, which

MAINTENANCE and ADJUSTMENTSWARNINGAlways stop engine and-disconnect spark plug wire before doing any maintenance.RAM OPERATIONIf the ram do

3. With an adjustable wrench remove the strainer tube assembly. See figure 21.INLET HOSEHOSE CLAMPSTRAINER TUBE ASSEMBLYBOTTOM HOLE ON BEAM ASSEMBLYF

STORAGE INSTRUCTIONSIn event engine is to be stored for any length of time (30 days or more), prepare as follows;1.Drain gasoline by tip

NOTES

249-645A16

PARTS LIST FOR LOG SPLITTER MODEL NO. 249-645ARef.No.PartNo.ColorCodeDescriptionNewPartRef.No.PartNo.ColorCodeDescriptionNewPart^ 1 727-0211Forward st

♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦LIMITED WARRANTYFor one year from the date of original retail purchase, MTD

PARTS INFORMATIONPOWER EQUIPMENT PARTS AND SERVICEParts and service for all MTD manufactured power equipment are available through the a

IMPORTANTIt is suggested that this manual be read in its entirety before attempting to assemble or operate. Keep •v this manual in a safe place for fu

TOOLS REQUIRED:(1) Raw Hide or Plastic Hammer(1) 1-1/8" wrench or adjustable wrench(2) 1/2" wrenches(1) Standard screw driver(1) 3/4"

ASSEMBLY INSTRUCTIONSJ. Pack the tapered roller bearings with automotive grease.NOTEDo Not put any grease in the hub caps.2. Place one spacer (A) on

5. Repeat steps 1 through 4 for the second wheel.6. With help from another person, place beam assembly on frame and line up four holes,

9. Secure the other end of high pressure hose to valve. A 3/4" wrench is required. See figure 9.11. Place end of engagement rod on valve

13. Thread hex lock nut (Q) on engagement rod until nut rest against the ferrule. Secure ferrule in engagement handle with cotter

?10W30OILH.D.FUNNELBREATHERTUBEFIGURE 16Before starting engine:During initial break-in period, oil level should be watched closely. See ENGINE