MTD 70 Series Especificações descarregar pdf (Página 63)

IGNITION SYSTEM

Spark plug removal

1. Disconnect and ground the spark plug wire.

2. Remove the spark plug using a 13/16” or 21mm

wrench. A flexible coupling or “wobbly” exten

sion may help. See Figure 7.17.

3. Gap a new spark plug to .024”-.032” (.60-.80

mm).

4. Install the new spark plug and tighten to a torque

of 15 - 18 ft - lbs (20-25 Nm).

Figure 7.17

High tension lead

Muffle

Valve cover

13/16” spark plug

socket

www.mymowerparts.com

For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 88 89

Sem comentários

MTD 70 Series Especificações Página 63