Mtd 247-650-000 Manual do Utilizador descarregar pdf (Página 4)

NOTE

This unit is shipped WITHOUT GASOLINE

or OIL. After assembly, see separate

engine manual for proper fuel and engine

oil recommendations.

ASSEMBLY INSTRUCTIONS

Tools Required for Assembly:

(2) 7/16" Open End or Box Wrenches*

(1) 1/2" Socket Wrench

* An Adjustable Wrench may be used in place of one

of the wrenches.

NOTE

The right and left side of your shredder

is determined from behind the unit.

rrri mi rni Ern

UNPACKING

Remove the shredder and loose parts from the

carton. Make certain all parts and literature have been

removed before the carton is discarded.

Parts in Carton;

Shredder

Chute Deflector

Hopper

Upper Leaf Ramp Section

Catcher Bag

Hardware Pack

Safety Glasses

Contents of Hardware Pack (See Figure 1):

A (8) Hex Bolts 1/4-20 x 1/2" Long

B (8) Hex Lock Nuts 1/4-20 Thread

C (6) Hex Washer Head Self-Tapping Screws

5/16-18 X 3/4" Long

D (2) Keepers

FIGURE 1.

CHUTE DEFLECTOR INSTALLATION

1. Place the chute deflector in position on the

discharge opening (on the left side of the shred-

----

der). See figure 2.

2. Secure chute deflector to discharge opening with

hex bolts (A) and hex lock nuts (B). Heads of the

hex bolts are inside the discharge opening. Hex nuts

go on the outside.

3. Tighten all four nuts and bolts securely.

1 2 3 4 5 6 7 8 9 ... 13 14

Comentários a estes Manuais

Sem comentários

Mtd 247-650-000 Manual do Utilizador Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas Mtd 247-650-000