Mtd 244-650A Manual do Utilizador descarregar pdf (Página 2)

IMPORTANT

SAFE OPERATION PRACTICES

1. Read the Operating and Service Instruction Manual

carefully. Be thoroughly familiar with the controls

and proper use of equipment.

2. N'eVei" aii'S^children to operate a power shredder.

3. Keep the are^ operation clear of all persons,

particularly sn^;all children and pets.

4. Check fuel before starting engine. Do not fill gas

oline tank indoors, when engine is running, or

while engine is still hot. Wipe off any spilled gas

oline before si’arting engine.

5. Do not chs-fige engine governor settings or over

speed engine.

6. Do not put hands near rotating parts. Keep clear

of discharge opening at all times.

7. If the equipment should start to vibrate abnor

mally, stop the engine (motor) and check imme

diately for the cause. Vibration is generally a

warning of trouble.

^ '^'hen cleaning, repairing or inspecting, make cer

tain blade and all moving parts have stopped. Dis

con, ract spark plug wire and keep wire away from

plug no prevent accidental starting.

9. Shut engine (motor) off and wait until blade comes

to a complete stop before unclogging chute.

10. Check blade and engine mounting bolts at fre

quent intervals for proper tightness.

11. Keep all nuts, bolts, and screws tight to be sure

equipment is in safe working condition.

12. Never store equipment with gasoline in the tank

inside of a building where fumes may reach an

open flame or spark. Allow engine to cool before

storing in any enclosure.

13. To reduce fire hazard keep free of grass, leaves or

excessive grease.

OPERATION

1. Service engine with gas and oil. See engine man

ual packed with shredder for complete instruc

tions for the care and maintenance of engine.

READ DIRECTIONS CAREFULLY.

2. When ready to start engine, place throttle control

lever in START position and start engine in accord

ance with instructions in engine manual. After en

gine starts, move throttle control lever to desired

engine speed. The engine is stopped by placing

control lever in the STOP position.

CAUTION:

The manufacturer recommends that the operator'

I wear safety glasses or some other suitable eye protec- .

tion as it is possible for chips to be elected out of the

I inlet openings while feeding material.

USING YOUR SHREDDER

Your shredder is designed for safe, efficient, operation.

CARE, OF COURSE, MUST BE EXERCISED THAT HANDS

ARE KEPT AWAY FROM ALL OPENINGS.

Your shredder guide extension is adjustable. It may be

adjusted to desired height by loosening the hand knob

as shown in figure 1.

FIGURE 1. GUIDE EXTENSION ADJUSTMENT

Feed the material so that it slides down the guide ex

tension. See figure 2.

GUIDE EXTENSION

HGURE 2. FEEDING MATERIAL INTO GUIDE

1 2 3 4 5 6 7 8 9 10

Comentários a estes Manuais

Sem comentários

Mtd 244-650A Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas Mtd 244-650A